Patty-O-Matic Protege, Owner'S Manual

Page: 2 / 26

2
Congratulations on the purchase of your new Model Protégé Patty
Molding Machine from Patty-O-Matic, Inc! The Model Protégé will form,
interleave paper between, and stack food patties. This machine is designed
for easy operation and cleaning. Please become familiar with this manual
and your machine will give you years of service.
The Model Protégé is shipped to you in at least two cartons which
contain the patty machine, feed tray complete with mold plate guard, parts
box, receiving table, and this manual. If you purchased your machine with
any other accessories, such as a mobile table or patty paper, these items may
be in a separate carton. The parts box that comes with the machine should
include a bottle of machine lubricant, a speed driver, samples of patty paper,
and a spare parts kit.
Your machine is equipped with one interlock. This interlock is
located on the top left side of the machine. The Feed Tray with the attached
Mold Plate Guard must be installed on the machine to engage the interlock
on top of the machine.
Feed Tray
Feed Tray Guard
Installing the Feed Tray with
the attached Mold Plate
Guard
Place tube of Feed Tray over the
Hopper. Line up the plunger that
is located on the underside of the
feed tray with the Tower Sleeve.
This will push down on the
interlock Tower located inside
the Tower Sleeve of the
Machine.
Interlock
Tower
Hopper
Mold Plate
Guard
Plunger
located
here
DO NOT ATTEMPT TO RUN THIS
MACHINE WITHOUT THE FEED
TRAY AND THE MOLD PLATE
GUARD IN THEIR PLACE!!
FAILURE TO DO SO COULD
RESULT IN SERIOUS BODILY
INJURIES!!