Patton SmartNode 5530 Series, User Manual

Page: 59 / 66

Introduction 59
SmartNode 5530 User Manual F • Reset Button Functions
Introduction
The Reset button (see figure 14 ) is used to do the following:
• Reboot the SmartNode device (see section “Resetting the SmartNode device when it is operating and the
Power LED is lit” on page 60)
• Erase the startup-config settings, which is followed by a SmartNode device reboot as indicated by the slow
blinking of all LEDs (see section “Resetting the SmartNode device when it is operating and the Power LED
is lit” on page 60)
• Factory reset, which is followed by a device reboot as indicated by the fast blinking of all LEDs (see section
“Resetting the SmartNode device when it is operating and the Power LED is lit” on page 60)
• Troubleshoot the SmartNode device if it is not booting properly (see section “Resetting the SmartNode device
when it is initially powered off ” on page 60)
Figure 14. SN5530 Reset button
SN5531/2BIS4VHP/EUI
SN5531/4BIS8VHP/EUI
9$
3RZHU
5HVHW
86% (7+ (7+ %5, %5, %5, %5, );6 );6 );6 );6
$FWLYLW\
/LQN
:$1
9$
3RZHU
5HVHW
86% (7+ (7+ %5, %5, %5, %5, );6 );6 );6 );6
$FWLYLW\ /LQN
:$1 BRI 0/6 BRI 0/7 BRI 0/4 BRI 0/5 BRI 0/2 BRI 0/3 BRI 0/0 BRI 0/1
SN5531/4BIS8VHPAVB/EUI
SN5531/8BIS16VHP/EUI
$FWLYLW\ /LQN
:$1