End User License Agreement
67
SmartNode 4950 User Manual
F • End user license agreement
If the Program(s) are acquired by or on behalf of a unit or agency of the United States Government, the Gov-
ernment agrees that such Program(s) are
commercial computer software
or
computer software documentation
and
that, absent a written agreement to the contrary, the Government’s rights with respect to such Program(s) are
limited by the terms of this Agreement, pursuant to Federal Acquisition Regulations 12.212(a) and/or DEARS
227.7202-1(a) and/or sub-paragraphs (a) through (d) of the “Commercial Computer Software - Restricted
Rights” clause at 48 C.F.R. 52.227-19 of the Federal Acquisition Regulations as applicable.
6. Termination
A)
The End User may terminate this agreement by returning the Designated Equipment and destroying all
copies of the licensed Program(s).
B)
Patton Electronics Company may terminate this Agreement should End User violate any of the provi-
sions of section
C)
Upon termination for
A
or
B
above or the end of the Term, End User is required to destroy all copies of
the licensed Program(s)
7. Other licenses
The Program may be subject to licenses extended by third parties. Accordingly, Patton Electronics Company
licenses the Programs subject to the terms and conditions dictated by third parties. Third party software identi-
fied to the Programs includes:
•
A routing license is included at no charge.
•
MGCP capabilities will require the purchase of an additional license.
•
The LGPL (Lesser General Public License) open source license distributed to you pursuant to the LGPL
license terms (
http://www.gnu.org/licenses/lgpl.html).
•
RedBoot (Red Hat Embedded Debug and Bootstrap) embedded system debug/bootstrap environment
from Red Hat distributed to you pursuant to the eCos license terms (
http://ecos.sourceware.org/license-
overview.html
) and GNU General Public License (GPL) terms (
http://www.gnu.org/copyleft/gpl.html
).
Source code is available upon request.
