2
OnSite 2701A/I Quick Start Guide
1.0 Introduction
Your OnSite device comes with one of the following power supply options:
•
External AC adapter with included power cord
•
Internal AC power supply
•
Internal DC power supply—no power accessories are included
• The device contains no user serviceable parts. The
equipment shall be returned to Patton Electronics for
repairs, or repaired by qualified service personnel.
• Mains Voltage: Do not open the case the when the
power cord is attached. Line voltages are present
within the power supply when the power cords are
connected. The mains outlet that is utilized to power
the device shall be within 10 feet (3 meters) of the
device, shall be easily accessible, and protected by a
circuit breaker.
• For AC powered units, ensure that the power cable
used meets all applicable standards for the country
in which it is to be installed, and that it is connected
to a wall outlet which has earth ground.
• For units with an external power adapter, the adapter
shall be a listed Limited Power Source.
• Hazardous network voltages are present in WAN
ports regardless of whether power to the unit is ON
or OFF. To avoid electric shock, use caution when
near WAN ports. When detaching the cables, detach
the end away from the device first.
• Do not work on the system or connect or disconnect
cables during periods of lightning activity.
• The interconnecting cables shall be acceptable for
external use and shall be rated for the proper applica-
tion with respect to voltage, current, anticipated tem-
perature, flammability, and mechanical serviceability.
Use only a 12V certified Limited Power Source external
power adapter marked LPS.
WARNING
CAUTION
CAUTION
