9. Reboot by plugging off and on the power supply of the adapter.
Note: it is recommended to do so immediately after changing the ip address.
Hints: if you don't see the adapter and the extension line activated and registered in the 3CX
server, you have to switch off and on the adapter. Only at plugging it in the adapter logs onto the
3CX server. We hope future firmwares will change that problem so the systems is reconnecting
in an interval if not successful the first time. Check the status on the first page after logging in.
10. Connect the Fax Machine to the LINE PORT in the Patton M-ATA adapter. You should hear
a dial tone as soon as you lift up the Fax Handset. Also the extension representing the M-ATA
