Patton C2 Charcoal Chef, Operating And Assembly Instructions Manual

Page: 19 / 129

NL, BE, LU
19
14
STEP8
27
Self-Tapping Bolt
Self-Tapping Bolt
Loosen the pre-assembled Self-Tapping Bolt from the end of Crank Handle
(27), then rotate the Crank Handle (27) into the hole of the front panel.
Fasten the Self-Tapping Bolt to the end of the Crank Handle ( 27)
，
after
rotating the Crank Handle
（
27
）
into the hole of the front panel.
Note: Make sure to rotate the crank handle counterclockwise completely to
the end.