10
About this guide
This guide describes installing and operating the Patton Electronics Model 3088A G.SHDSL
OnSite™ CPE.
Audience
This guide is intended for the following users:
•
Operators
•
Installers
•
Maintenance technicians
Structure
This guide contains the following chapters and appendices:
•
Chapter 1
on page 14 provides information about CPE features and capabilities
•
Chapter 2
on page 18 contains an overview describing CPE operation and applications
•
Chapter 3
on page 34 provides hardware installation procedures
•
Chapter 4
on page 41 provides quick-start procedures for configuring the OnSite CPE
•
Chapter 5
on page 45 describes how to install and operate the OnSite CPE
•
Chapter 6
on page 49 describes how to configure the OnSite CPE, save the configuration, reset the CPE to
the factory default condition, and upgrade the system software
•
Chapter 7
on page 51 describes the system tools that can be used to diagnose problems with the CPE
•
Chapter 8
on page 53 contains information on contacting Patton technical support for assistance
•
Appendix A
on page 56 contains compliance information for the OnSite CPE
•
Appendix B
on page 58 contains specifications for the CPE
•
Appendix C
on page 63 provides the factory default values for the CPE
•
Appendix D
on page 66 provides cable recommendations
•
Appendix E
on page 68 describes the CPE’s ports and pin-outs
For best results, read the contents of this guide
before
you install the CPE.
