Patton 3086FR, User Manual

Page: 87 / 170

DSLAM Connections with remote CPE units 87
Model 3086FR ATM IAD User Guide 8 • 3086FR routed and bridged ATM connections
RFC 1483 Bridged Configuration.
No additional IP addresses are needed other than the IP address chosen earlier. In fact, if you are configuring and
managing the model 3086FR only from the CLI (Command Line Interface), an IP address is not needed at all.
The limitation of no IP address precludes the user from doing web management of the 3086FR since manage-
ment is done via the Ethernet port.
As in the PPPoA Bridged application, both sides of the RFC 1483 bridged connection are on the same subnet.
Model 3086FR (Remote) Configuration Steps (RFC 1483 Bridged)
From the command line interface (CLI) via the RS-232 control port,
→
ip list interfaces
One IP interface is called ip1 with an IP address of 192.168.1.1
Change the IP address so it is in the same subnet as both PCs. For example, to 192.168.100.2
→
ip set interface ip1 ipaddress 192.168.100.2 255.255.255.0
1. Now you can bring up the web-page management system on your browser by entering the IP address of
the 3086FR.
2. On the Menu, go to Configuration, then to WAN Connections. Delete the factory default WAN services
already defined.
Click on
Create a new service
in the main window, select
RFC_1483_Bridged
and click on the
Configure
button.
In the Description field, enter the description you wish. In this example, it is called RFC 1483 B.
Leave VCI as 35 and Encapsulation Method as LLC/SNAP. Then click on
Apply
.
3. Go to
G.SHDSL
in the Configuration Menu, then the submenu
Configuration
.