CodesSmartNode 4660 and 4670 Series Rear Panels
20
SmartNode 4660 & 4670 User Manual
1 • General Information
Expansion port
G.SHDSL
,
ADSL, EFM or
SFP
G.SHDSL
•
RJ-45 connector
•
Provides up to 24 Mbps (G.SHDSL.bis, ATM) symmetrical throughput
•
Supports multiple PVC and DSLAM interoperability
ADSL
•
RJ-45 connector
•
Provides up to 24 Mbps (ADSL2+, ATM) symmetrical throughput
•
Supports multiple PVC and DSLAM interoperability
EFM
•
RJ-45 connector
•
Depending on model, supporting 4-wire (2pair) or 8-wire (4pair) EFM con-
nection
•
IEEE 802.3 G.998.2 compliant.
SFP
•
SFP tray supporting various Fiber to ethernet converter modules. See
http://www.patton.com/products/sfpmodules.asp for tested modules.
Console
Used for service and maintenance, the Console port (see
Figure 2
), an RS-232 RJ-
45 connector, connects the SmartNode to a serial terminal such as a PC or ASCII
terminal (also called a dumb terminal).
12V DC, 1.0A
The SmartNode has a 12V DC 1A power input (see
Figure 2
).
Reset
The reset button (see
Figure 2
) has three functions:
•
Restart the unit with the current startup configuration—Press (for less than 1
second) and release the
Reset
button to restart the unit with the current star-
tup configuration.
•
Restart the unit with factory default configuration—Press the
Reset
button for
5 seconds until the
Power
LED starts blinking to restart the unit with factory
default configuration.
•
Restart the unit in bootloader mode (to be used only by trained SmartNode
4660 technicians)—Starting with the unit powered off, press and hold the
Reset
button as you apply power to the unit. Release the
Reset
button when
the
Power
LED starts blinking so the unit will enter bootloader mode.
Table 7. SN4670 LED Definitions
LED
Definitions
Pwr
Is on after 10sec when power is applied to the unit. Flashes once per sec-
ond during boot (startup).
Run
When lit, the unit is in normal operation.
ETH 0/0 -0/3
Green LED
Flashes when data is received or transmitted at the corresponding Ethernet
port.
Table 6. SN4670 rear panel ports
Port
Description
