![background image](http://html1.mh-extra.com/html/patton-electronics/smartnode-5400/smartnode-5400_getting-started-manual_4120592026.webp)
Installing the gateway router
26
SmartNode 5400 Getting Started Guide
3 • SmartNode installation
Connecting the power supply
The 5400 has the option of an internal or external
Internal AC Power Supply
, or an internal or external
Verify
that the green Power LED is lit (see figure 5).
.
Internal AC Power Supply.
1.
Insert the female end of the AC power to the mains port.
Figure 4. 5400 rear panel
2.
Verify that the AC power cord included with your router is compatible with local standards. If it is not,
refer to
“Contacting Patton for assistance”
on page 41 to find out how to replace it with a compatible
power cord.
3.
Connect the male end of the AC power cord to an appropriate AC power outlet.
Figure 5. Power LED
4.
Verify that the green
Power
LED is lit (see
figure 5
).
•
Do not connect power to the AC Mains at this time.
•
There are no user-serviceable parts in the power supply sec
tion of the Model 5400. Contact Patton Electronics Technical
support at (301)975-1007, via our web site at
http://www.patton.com, or by e-mail at [email protected],
for more information.
•
The internal power supply automatically adjusts to accept an
input voltage from 100 to 240 VAC (50/60 Hz).
Verify that the proper voltage is present before plugging the
power cord into the receptacle. Failure to do so could result in
equipment damage.
WARNING
ACT
LIN
K
RS
-2
32
Co
nso
le
ET
H 0
/0
ET
H 0
/1
Reset
12V
, 1.25A
–
+
ETH 0/0
10/100/1000Base-T port
RESET button
Console
RS-232 port
ETH 0/1
10/100/1000Base-T port
Power
(~120–240V, 50/60 Hz, 1A)
DSL port (optional)
SN5400
SmartNode 5400
Enterprise Session Border Router
Power