![background image](http://html1.mh-extra.com/html/patton-electronics/smartnode-5200/smartnode-5200_getting-started-manual_4121095040.webp)
Introduction
40
SmartNode 5200 Getting Started Guide
C • Cabling
Introduction
This section provides information on the cables used to connect the SmartNode and the interface cards to the
existing network infrastructure and to third party products.
Ethernet
Ethernet devices (10Base-T/100Base-T) are connected to the SmartNode over a cable with RJ-45 plugs. All
Ethernet ports on the SN5200 & SN4562 are Auto-MDX and use any straight or crossover cable to connect to
hubs, switches, PCs or other devices.
Figure 8. Typical Ethernet straight-through cable diagram
Hub
RJ-45, male
1
2
3
6
RJ-45, male
1
2
3
6
Straight-through cable
Note:
Other pins are not used.
Summary of Contents for SmartNode 5200
Page 18: ...18 Chapter 2 Applications overview Chapter contents Introduction 19 Typical application 19...
Page 39: ...39 Appendix C Cabling Chapter contents Introduction 40 Ethernet 40...
Page 41: ...41 Appendix D Port pin outs Chapter contents Introduction 42 Ethernet 42...
Page 43: ...43 Appendix E SmartNode 5200 factory configuration Chapter contents Introduction 44...