![background image](http://html.mh-extra.com/html/patton-electronics/smartnode-2292/smartnode-2292_getting-started-manual_763242048.webp)
Ethernet 10Base-T and 100Base-T
48
Model 2292 & 2294 Series Getting Started Guide
C • Cabling
Ethernet 10Base-T and 100Base-T
Ethernet devices (10Base-T/100Base-T) are connected to the SmartNode over a cable with RJ-45 plugs. Use a
cross-over cable to a host, or a straight cable to a hub. See
figure 18
(host) and
figure 19
on page 49 (hub) for
the different connections.
Note
The SmartNode 2292 Series is equipped with Auto-MDX Ethernet ports.
Use straight-through wired cables for host or hub/switch connections
Figure 18. Ethernet cross-over
Host
Cross-over cable
RJ-45, male
Tx+
Tx-
Rx+
Rx-
1
2
3
6
RJ-45,
1 TX+
2 TX-
3 RX+
6 RX-
Twisted pair 1
Twisted pair 2
, 1.25A
Reset
Ports
ETH 0/1
ETH 0/0