background image

SmartLink 4050 Series Quick Start Guide

19

Copyright statement

Copyright © 2008, Patton Electronics Company. All rights reserved.
The information in this document is subject to change without notice. Patton Electronics assumes no 
liability for errors that may appear in this document.

Trademarks statement

The term 

SmartLink

 is a trademark of Patton Electronics Company. All other trademarks presented in this docu-

ment are the property of their respective owners.

Patton support headquarters in the USA

Online support: Available at 

www.patton.com

E-mail support: E-mail sent to 

[email protected]

 will be answered within 1 business day

Telephone support: Standard telephone support is available five days a week—from 

8:00 am

 to 

5:00 pm EST

 (

1300 

to 

2200 UTC/GMT

)—by calling 

+1 (301) 975-1007

Support via VoIP: Contact Patton free of charge by using a VoIP ISP phone to call 

sip:[email protected]

Fax: 

+1 (253) 663-5693

Alternate Patton support for Europe, Middle East, and Africa (EMEA)

Telephone support: Standard telephone support is available five days a week—from 

8:00 am

 to 

5:00 pm CET

 

(

0900

 to 

1800 UTC/GMT

)—by calling 

+41 (0)31 985 25 55

Fax: 

+41 (0)31 985 25 26

Note

For additional service and support information, refer to the “Contacting Patton for assistance” chapter 
of the 

SmartLink 4050 Series Getting Started Guide

 located on the CD-ROM that came with your SIP 

phone or available online at 

www.patton.com

.

For additional warranty, trademark, compliance, and technical support information, refer to the 

SmartLink 4050 

Series Getting Started Guide

 located on the CD-ROM that came with your SIP phone or available online 

at 

www.patton.com

.

Summary of Contents for SL4050/B12/E





















Reviews: