Setting up the VoIP SIP phone
24
SmartLink 4050 Series Getting Started Guide
2 • Installing the SmartLink SIP Phone
Note
You can stop the setup process at any time by pressing
MENU
+
OK
to save
any changes and exit, or by pressing
MENU
+
CANCEL
to quit without
saving. The phone will automatically time-out and exit the menu screen if
there are no inputs from the user.
Use
and
keys on the control pad to select
ENABLE
or
DIS-
ABLE
.
The
key can also be used as a backspace key to delete characters.
Display Name
1.
Press
2.
Use the numeric keypad to enter the display name
Note
To type text characters, press the appropriate key on the numeric keypad (see
figure 1
on page 15). For example, to type a “z” press the
9
key until the low-
ercase
z
appears—the displayed sequence would be:
9 W X Y Z w x y z
.
ADSL DIalup
Some Internet Service Providers (mostly ADSL) use PPPoE which requires that the user enter an ID and a
password to access the Internet. In this case, enable ADSL DIALUP and enter the PPPoE ID and
PPPoE password.
ENABLE ADSL dialup
1.
Press
2.
Use
to select
ENABLE
Set up ADSL ID
1.
Press
2.
Enter the ADSL ID
Cancel
OK
Cancel
Menu
Menu
Display Name:
Your name
OK
