3
4
1.3 SERVICE
All warranty and nonwarranty repairs must be returned freight pre-
paid and insured to Patton Electronics. All returns must have a Return
Materials Authorization number on the outside of the shipping contain-
er. This number may be obtained from Patton Electronics Technical
Support:
Tel: (301) 975-1007
Email: [email protected]
www: http://www.patton.com
Patton Electronics' technical staff is also available to answer any
questions that might arise concerning the installation or use of your
Model 1094ARC. Technical Service hours: 8AM to 5PM EST,
Monday through Friday.
22..00
G
GEEN
NEER
RA
ALL
IIN
NFFO
OR
RM
MA
ATTIIO
ON
N
Thank you for your purchase of this Patton Electronics product.
This product has been thoroughly inspected and tested and is warrant-
ed for One Year parts and labor. If any questions arise during installa-
tion or use of this product, please contact Patton Electronics Technical
Support at: (301) 975-1007.
2.1 FEATURES
• DSL Distances on just two wires using HDSL technology
• DTE Speeds n x 64 to 1.152 Mbps
• 2-wire Operation
• Fits in Patton’s 2U Rackmount Chassis
• SNMP Network Management with In-Band Management of Remote
Units plus Advanced Diagnostics & Statistics using Patton Model
1001MC
• Internal, external or receive recovered clocking options
• LED indicators for TD, RD, CTS, CD, DTR, TM, ER and NS
2.2 DESCRIPTION
The Patton Electronics
NetLink
TM
HDSL Model 1094ARC Multi-
Rate DSL Modem provides high speed 2-wire connectivity to ISPs,
PTTs, and corporations using HDSL technology. HDSL offers the abili-
ty to deliver the maximum bit rate that a twisted pair line can accom-
modate. Supporting
multiple line rates from 144kbps to 1168Mbps, the
NetLink provides “megabit” speeds to leased line, LAN to LAN inter-
connection, and WAN access networks over 2.9 miles/4.7 km
(1.152Mbps on 24AWG/.5mm wire).
The
NetLink
TM
HDSL rack card allows DTE speeds from 64kbps
to 1.152Mbps in increments of 64kbps. Features include loopback
diagnostics, out-of-band SNMP/HTTP remote management capabili-
ties, using Model 1000MC, and externally accessible configuration
switches.
As a symmetric DSL NTU,
NetLink
TM
HDSL offers the same data
rates in both directions over a single pair of regular telephone lines
using 2B1Q modulation. The Model 1094ARC is designed to fit into
Patton’s 2U (3.5”) high rack chassis. This chassis uses a mid-plane
architecture allowing front cards to be plugged into different rear cards.
Please see the Model 1001RP14 manual for more information on the
power supply options that are available.
IMPORTANT:
The Model 1094ARC is equipped with flash
upgrade. Refer to Patton website http://www.patton.com or
contact Technical Support for the latest version of the soft-
ware.
NOTE:
Packages received without an RMA number will not be
accepted.
