Patton electronics G.SHDSL NTU, User Manual

Page: 62 / 150

G.SHDSL NTU User Manual V0.03 61
4 Configuration with Console Port
This chapter will deal with the specifics of configuration and operation of this product via console port with terminal
emulation program. The configuration G.SHDSL NTU is performed via a menu-driven embedded software, using a
standard ASCII terminal or a PC running a terminal emulation application connected to the rear panel CONSOLE port.
Windows includes a terminal emulation program called HyperTerminal. Connect the appropriate communication
port from the PC to this device. After the physical connection is made, you are ready to configure this product. Make
sure you have connected the supplied RS-232C serial cable (DB9F to RJ-45 Plug) to the console port on the rear panel
on this product.
Run the terminal emulation program such as Hyper Terminal with the following setting:
Emulation: VT-100 compatible
Band rate: 115200, Data bits: 8, Parity: None, Stop Bits:1 , Flow Control: None
4.1 Login Procedure
At the start up screen, you will see: