3 • Configuring the RAS for operation
Model 3125 RAS Getting Started Guide
40
Configuring the RAS with a Web browser
16. Use the left arrow key to return to the top level management page.
17. Select
a
Home.
18. Select 1 StoreConfig to save your IP address and netmask.
The RAS is now prepared for configuration using a Web browser.
Note
The default gateway has not been configured at this time. You can
access the web pages with a PC located on the same network as the
RAS or you must configure the default gateway using HyperTermi-
nal. Select
i
IP then
2
Default Gateway.
Configuring the RAS with a Web browser
This section describes configuring the following:
•
User authentication
•
Dial-in user configuration
•
Default gateway
Opening the RAS Web Administration Pages
Do the following:
1. Connect the RAS to the LAN.
2. Start a Web browser session and go to the URL:
http://<the.ras.ip.address>
where the <the.ras.ip.address> is the IP address of the RAS entered in Step 8.
3. When the username and password window displays, type
superuser
as the username and password,
then press <RETURN>. The Administration Pages
Home
window appears (see figure 22).
Summary of Contents for ForeFront 3125
Page 6: ...Contents Model 3125 RAS Getting Started Guide 6...
Page 10: ...Compliance Information Model 3125 RAS Getting Started Guide 10...
Page 14: ...About this guide Model 3125 RAS Getting Started Guide 14...
Page 62: ...4 Operation and shutdown Model 3125 RAS Getting Started Guide 62 De activating the RAS...
