Accessing the System Console
25
Model 2285 Getting Started Guide
2 • Getting started
2285 login: root
Password:
#
8. After login, user can use various shell commands in the CLI (command line interface). For details on the
CLI, refer to the chapter 7,
“CLI guide”
on page 87.
9. “editconf ” command will allow you to enter the text-menu driven interface and the menu
screen displayed:
# editconf
_] / [________________________________________________________________________
1. Network configuration
2. Serial port configuration
3. System administration
________________________________________________________________________________
COMMAND (Display HELP: help)>save
COMMAND (Display HELP: help)>apply
COMMAND (Display HELP: help)>help
_] HELP [_____________________________________________________________________
[Enter] refresh
[ESC] cancel or go to upper
/ go to root
.. go to upper
clear clear screen
pwd display path to current menu
save save current configuration
apply apply current configuration
help display this
exit exit
________________________________________________________________________________
COMMAND (Display HELP: help)>[Enter]
_] / [________________________________________________________________________
1. Network configuration
2. Serial port configuration
3. System administration
________________________________________________________________________________
COMMAND (Display HELP: help)>
From the main menu screen, the users may select a menu item for configuration of the Model 2285 parameters
by selecting the menu number and pressing the [ENTER] key. In the submenu screen, users can configure the
required parameters guided by online comments. All the parameters can be stored into the non-volatile mem-
ory space of the Model 2285, but the settings will not be stored until users enter “save” command on the
menu. All the configuration change will be effective after entering “apply” command on the menu.
Using remote console
The IP address of the Model 2285 must be known before users can access the Model 2285 using the Remote
console (see chapter 3,
“Network configuration”
on page 29 for details). The default IP address of Model 2285
is 192.168.161.5.
