14
4.0 CONFIGURATION
The CopperLink Model 2168r has eight DIP switches for configuring the
unit for a wide variety of applications. This section describes switch loca-
tions and explains the different configurations. The Model 2158 does not
include dip switches.
4.1 CONFIGURING THE HARDWARE DIP SWITCHES
Using a small flat-tip screwdriver, remove the protective cover located on
the underside of the CopperLink Ethernet Extender (see Figure 7).
Figure 7.
Removing protective cover
Figure 8 and Figure 9 on page 15 show the orientation of the DIP
switches in the On and Off positions.
CopperLink™ Ethernet Extender
CopperLink