background image

 

3

 

1.0  WARRANTY INFORMATION

 

Patton Electronics

 

 warrants all Model 6010 Series and Model 3101SC 

components to be free from defects, and will—at our option—repair or 
replace the product should it fail within one year from the first date of the 
shipment.

This warranty is limited to defects in workmanship or materials, and does 
not cover customer damage, abuse or unauthorized modification. If this 
product fails or does not performs as warranted, your sole recourse shall 
be repair or replacement as described above. Under no condition shall 

 

Patton Electronics

 

 be liable for any damages incurred by the use of this 

product. These damages include, but are not limited to, the following: lost 
profits, lost savings and incidental or consequential damages arising 
from the use of or inability to use this product. 

 

Patton Electronics

 

 spe-

cifically disclaims all other warranties, expressed or implied, and the 
installation or use of this product shall be deemed an acceptance of 
these terms by the user.

 

Note

 

Conformity documents of all Patton products can be viewed 

online at www.patton.com under the appropriate product page.

 

1.1  COMPLIANCE

 

EMC Compliance:

 

• EN55022, Class A

• EN55024

 

Safety Compliance:

 

• EN 60950-1

 

1.2  CE DECLARATION OF CONFORMITY

 

We certify that the apparatus identified in this document conforms to the 
requirements of Council Directive 1999/5/EC on the approximation of the 
laws of the member states relating to Radio and Telecommunication Ter-
minal Equipment and the mutual recognition of their conformity.

The safety advice in the documentation accompanying this product shall 
be obeyed. The conformity to the above directive is indicated by the CE 
sign on the device.

Summary of Contents for 6010 Series













Reviews: