Modify Response—Configuring the alarm response system
28
Access Server Administrators’ Reference Guide
4 • Alarms
Alarm Syslog Priority (syslogAlarmPriority)
The SYSLOG priority of the alarm SYSLOG message. If the minimum priority for SYSLOG daemon (set
under the System Log link) is less than this value, the SYSLOG daemon will receive the major or critical alarm
SYSLOG message
(prioritySystem
has the highest priority;
priorityVerbose
the lowest).
•
priorityVerbose(5)
•
priorityDebug(10)
•
priorityInfo(20)
•
priorityOddity(40)
•
priorityService(60)
•
prioritySystem(80)
•
priorityDisable(1000)
•
priorityDisable(1000)
Alarm SNMP Trap IP 1 (alarmTrapIp0)
The IP address of a host system which is running the SNMP trap daemon. Critical and major alarm messages
will be sent to the system. If set to 0.0.0.0 then no trap message will be sent in response to a major alarm.
Alarm SNMP Trap IP 2 (alarmTrapIp1)
The IP address of a host system which is running the SNMP trap daemon. Critical and major alarm messages
will be sent to the system. If set to 0.0.0.0 then no trap message will be sent in response to a major alarm.
Alarm SNMP Trap IP 3(alarmTrapIp2)
The IP address of a host system which is running the SNMP trap daemon. Critical and major alarm messages
will be sent to the system. If set to 0.0.0.0 then no trap message will be sent in response to a major alarm.
Alarm SNMP Trap IP 4(alarmTrapIp3)
The IP address of a host system which is running the SNMP trap daemon. Critical and major alarm messages
will be sent to the system. If set to 0.0.0.0 then no trap message will be sent in response to a major alarm.
Temperature Threshold(boxAlarmTemperature)
If the box registers a temperature greater than this temperature an alarm will be reported. Temperature is in
degrees Celsius.
