![background image](http://html1.mh-extra.com/html/patton-electronics/29xx-series/29xx-series_administrators-reference-manual_4056829136.webp)
Static User Authentication
136
Access Server Administrators’ Reference Guide
9 • Callback
Static User Authentication
In the
Modify Static User
window are two extra settings for callback. The callback type and callback number
can be set on a user basis.
Figure 55. Static user configuration showing callback configuration
Callback Configuration (suCallbackConfig)
This is the type of callback allowed for this user. The following options are available:
•
noCallback(0)—no callback allowed for this user (default).
•
setByCaller(1)—callback and phone number assigned by the user.
•
alwaysCallbackTo(2)—always call back to the phone number specified by suCallbackNumber—callback
number needs to be specified.
•
callbackToCallingNum(3)—call back to the calling phone number. This is only available with ISDN
PRI lines.
Callback phone number (suCallbackNumber)
When the callback type is set to
alwaysCallbackTo
, this is the phone number that the RAS will call after call-
back is negotiated. This entry has a limit of 80 characters.
RADIUS Configuration
If using a radius server for authentication and global callback is enabled and set to
setByAuth
, the user profile in
radius will determine callback. If the service-type attribute is not
Callback Framed
, no callback will be allowed.
If the service-type attribute is set to
Callback Framed
with no phone number, the user will be allowed to assign
the callback number. If the service-type attribute is set to
Callback Framed
and the Callback-Number attribute
has a valid telephone number, the user will be called back at that number.