4
1.3 EQUIPMENT ATTACHMENT LIMITATIONS
Notice: The Industry Canada label identifies certified equipment. This
certification means that the equipment meets telecommunications net-
work protective, operational and safety requirements as prescribed in
the appropriate Terminal Equipment Technical Requirements docu-
ment(s). The Department does not guarantee the equipment will oper-
ate to your satisfaction. Before installing this equipment, ensure that it
is permissible to be connected to the facilities of the local telecommuni-
cations company. The equipment must also be installed using an
acceptable method of connection. Be aware that compliance with the
above conditions may not prevent degradation of service in some situ-
ations. Repairs to certified equipment should be coordinated by a rep-
resentative designated by the supplier. Any repairs or alterations you
make to this equipment, or equipment malfunctions, may give the
telecommunications company cause to request the user to disconnect
the equipment. Ensure for your own protection that the electrical
ground connections of the power utility, telephone lines and internal
metallic water pipe system, if present, are connected together. This
precaution may be particularly important in rural areas.
CAUTION: Do not attempt to make such connections yourself.
Instead, contact the appropriate electric inspection authority, or
electrician, for assistance.
Notice: The Ringer Equivalence Number (REN) assigned to each ter-
minal device provides an indication of the maximum number of termi-
nals allowed to be connected to a telephone interface. The termination
on an interface may consist of any combination of devices subject only
to the requirements that the sum of the Ringer Equivalence Numbers
of all the devices does not exceed five.
1.4 PATTON CONTACT INFORMATION
If you have any trouble operating the Model 2710RC, contact
Patton Electronics Technical Support at 301-975-1000. The tele-
phone company may ask you to disconnect the equipment from the
telephone network until the problem has been corrected or until you
are certain that the Model 2710RC is not malfunctioning. In accor-
dance with FCC rules and regulation CFR 47 68.218(b)(6), you must
notify the telephone company prior to disconnection.
The following information may be required when applying to your
local telephone company for leased line facilities. The Universal
Service Order Code (USOC) is RJ-48C. The Facility Interface Codes
(FIC) are 04DU9-BN, 04DU9-DN, 04DU9-1KN, and 04DU9-1SN. The
Service Order Code (SOC) is 6.0N.
Facility
Service
Network
Service
Interface
Code
Connection
Code
1.544 Mbps SF format
without line power
04DU9-BN
6.0N
RJ48C
1.544 Mbps SF and
B8ZS without line power
04DU9-DN
6.0N
RJ48C
1.544 Mbps ANSI ESF
without line power
04DU9-1KN
6.0N
RJ48C
1.544 Mbps ANSI ESF and
B8ZS without line power
04DU9-1SN
6.0N
RJ48C
FCC PART 68 COMPLIANCE STATEMENT
This equipment complies with Part 68 of FCC Rules. Please note
the following:
1.
You are required to request service from the telephone company
before you connect the CSU to a network. When you request serv-
ice, you must provide the telephone company with the following data.
When you request T1 Service, you must provide the telephone com-
pany with the Facility Interface Code. Provide the telephone compa-
ny with both of the following codes: 04DU9-B (1.544 MB D4 framing
format) and 04DU9-C (1.544 MB ESF format). The telephone com-
pany will select the code it has available. The Service Order Code(s)
(SOC): 6.0N. The required Universal Service Order Code (USOC)
jack: RJ 48C. The make, model number, and FCC Registration num-
ber of the CSU.
2.
Your telephone company may make changes to its facilities, equip-
ment, operations, or procedures that could affect the proper func-
tioning of your equipment. The telephone company will notify you
in advance of such changes to give you and opportunity to main-
tain uninterrupted telephone service.
3.
If your CSU causes harm to the telephone network, the telephone
company may temporarily discontinue your service. If possible,
they will notify you in advance, but if advance notice is not practi-
cal, you will be notified as soon as possible and will be informed of
your right to file a complaint with the FCC.
4.
If you experience trouble with the CSU, please contact Patton
Electronics, Co. for service or repairs. Repairs should be per-
formed only by Patton Electronics Co.
5.
You are required to notify the telephone company when you dis-
connect the CSU from the network.
3
