background image

APPENDIX A

MODEL 2065/66RC SPECIFICATIONS

Transmission Format:  Synchronous
External Interface:  

Dual UD-26 high density connectors

Internal Interface:

Connection to Model 1000R16P rack 
chassis via male card edge

Electrical Interface:

X.21 - EIA RS-422/V.11 compatible;             
RS-232 - RS-232/V.24 compatible; V.35 data
and clock signals:  receivers - V.35 
compliant, drivers - 0.55V differential signal; 
V.35 control signals - RS-232/V.24 
compatible

Data Rates:

Model 2065RC (RS-232), up to 128 kbps;
Model 2066RC (V.35), up to 2.048 Mbps. 

Clocking:

RS-232/V.35 DCE or DTE receiving timing 
from an X.21 DCE device

DCE to DCE buffering: Dual 16-bit buffers for full duplex operation -

set to 8 bits in case of underflow or overflow.

Controls:

Switchable, custom control settings (see 
Section 3.0)

Indicators: 

Bi-level LED indicators for TD, RD, TC, RC 
and XC; single green indicator for 
INDICATION and CONTROL; single red 
indicator for elastic buffer status.

Power Supply: 

Rack-mount power supply is switchable 
between 120V and 240V AC; chassis 
supplies 10V AC to the Model 
2065/2066RC, typical consumption is  1.2 
watts

Temperature:

0-50°C / 32-122°F

Humidity:

5-95%, noncondensing

Dimensions:  

0.95”w x 3.1”h x 5.4”l

Copyright ©

Patton Electronics Company

All Rights Reserved

13

APPENDIX B

PATTON MODEL 2065/66RC FACTORY REPLACEMENT PARTS

The Patton Model 2065/66RC rack system features interchangeable

rear half cards, power cords/fuses for international various operating
environments and other user-replaceable parts.  Model numbers and
descriptions for these parts are listed below:

Patton Model #

Description

2065-26M/15F.....................Cable, 6 ft, UD-26M to DB-15F
2065-26M/15M ....................Cable, 6 ft, UD-26M to DB-15M
2065-26M/25F.....................Cable, 6 ft, UD-26M to DB-25F
2065-26M/25M ....................Cable, 6 ft, UD-26M to DB-25M       
2065-26M/34F.....................Cable, 6 ft, UD-26M to M/34F
2065-26M/34M ....................Cable, 6 ft, UD-26M to M/34M

1000RPEM..........................120/240V Rear Power Entry Module
1000RPSM-1.......................120/240V Front Power Supply Module
1000RPEM-DC ...................DC Rear Power Entry Module
1000RPSM-48A ..................48V Front Power Supply Module

0805US ...............................American Power Cord
0805EUR.............................European Power Cord CEE 7
0805EURP ..........................Europlug Power Cord CEE 7/16
0805UK ...............................United Kingdom Power Cord
0805AUS.............................Australia/New Zealand Power Cord
0805DEN.............................Denmark Power Cord
0805FR ...............................France/Belgium Power Cord
0805IN.................................India Power Cord
0805IS.................................Israel Power Cord
0805JAP..............................Japan Power Cord
0805SW ..............................Switzerland Power Cord

0516FPB1 ...........................Single Width Blank Front Panel
0516FPB4 ...........................4-Wide Blank Front Panel
0516RPB1...........................Single Width Blank Rear Panel
0516RPB4...........................4-Wide Blank Rear Panel

056S1..................................Set of 16 #4 pan head screws/washers

14

Summary of Contents for 2065RC










Reviews: