APPENDIX C
FACTORY REPLACEMENT PARTS
The Patton Model 2017RC rack system features custom front and
rear power supply entry modules and other user-replaceable parts.
Model numbers and descriptions for these parts are listed below:
Patton Model #
Description
1000RPEM..........................120/240V Rear Power Entry Module
1000RPSM-2.......................120/240V Front Power Supply Module
1000RPEM-DC ...................DC Rear Power Entry Module
1000RPSM-48A ..................48V Front Power Supply Module
1000RPEM-V ......................120/240V CE Compliant Rear Power
Entry Module
1000RPSM-V ......................120/240V CE Compliant Front Power
Supply Module
0805US ...............................American Power Cord
0805EUR.............................European Power Cord CEE 7
0805UK ...............................United Kingdom Power Cord
0805AUS.............................Australia/New Zealand Power Cord
0805DEN.............................Denmark Power Cord
0805FR ...............................France/Belgium Power Cord
0805IN.................................India Power Cord
0805IS.................................Israel Power Cord
0805JAP..............................Japan Power Cord
0805SW ..............................Switzerland Power Cord
0516FPB1 ...........................Single Width Blank Front Panel
0516FPB4 ...........................4-Wide Blank Front Panel
0516RPB1...........................Single Width Blank Rear Panel
0516RPB4...........................4-Wide Blank Rear Panel
056S1..................................Set of 16 #4 pan head screws/washers
17
APPENDIX D
PATTON MODEL 2017RC
INTERFACE SETTINGS AND ORIENTATION
Copyright © 1997
Patton Electronics Company
All rights reserved
PATTON MODULAR INTERFACE - 10 Wire RJ-45
Contact Number
Circuit
Description
1
N/A
Not Used
2
125
DSR
3
109
Received Line Signal Indicator (CD)
4
108 / 2
DTE Ready (DTR)
5
102
Signal Common
6
104
Received Data
7
103
Transmitted Data
8
106
Clear to Send
9
105 / 133
Request to Send / Ready for Receiving
10
N/A
Not Used
Pins 2-9 conform to the EIA/TIA-561 eight position non-synchronous interface standard.
For all modular jacks
(6, 8 or 10 position):
Pin 1
is always toward
the
bottom
when the
rear card is oriented
correctly in the slot
18