Patton electronics 2013 User Manual Download

Page: 3 / 3

PATTON MODEL 2013 SPECIFICATIONS

Transmission Format: Asynchronous, full or half duplex

Interface Standards: Unisys TDI, CCITT V.28.EIA/RS-232D

RS-232 Connection:

DB-25 female, configured as DCE

RS-232 (DTE) Pins

Required:

2, 3, 4, 5, 6, 8 and 20

TDI Connection:

DB-25 male; TD/RD on pin 2, signal ground
on pin 7, chassis ground on pin 1 (where
needed)

Maximum RS-232

Distance:

100’ over three twisted pairs

Maximum TDI
Distance:

1000’ over one twisted pair

Maximum Terminals

Supported:

One RS-232 (DTE) terminal, 10 TDI
terminals

LED Indicators:

RD on each side

Data Rates:

Transparent to data rate

Power Supply:

No AC power or batteries required; DC
voltage of >/= 6.2 V (unloaded) or >/= 6.8 V
(loaded) supplied to device via RS-232
(DTE) pin 20

Dimensions:

2.20”L x 1.75”W x 0.75”H

Patton Electronics Company

Summary of Contents for 2013

Page 1: ...USER MANUAL MODEL 2013 Asynchronous RS 232 to TDI Interface Converter SALES OFFICE 301 975 1000 TECHNICAL SUPPORT 301 975 1007 http www patton com Part 07M2013 A Doc 077021UA Revised 11 28 94...

Page 2: ...supports TDI distances to 1000 feet Distances to 100 are possi ble on the RS 232 side of the unit The Model 2013 needs no AC power or batteries for operation drawing necessary operating power from pin...

Page 3: ...assis ground on pin 1 where needed Maximum RS 232 Distance 100 over three twisted pairs Maximum TDI Distance 1000 over one twisted pair Maximum Terminals Supported One RS 232 DTE terminal 10 TDI termi...