WARNING: This device utilizes a class IIIB laser device which emits
invisible light. There is potential for eye damage if proper caution is not
taken. The laser port output is classified as class IIIA due to attenua-
tion in the fiber cable. Eye protection should be worn at all times when
the unit is operational and the laser port is not connected. The laser
assembly should not be modified in any way. The fiber cable should
never be disconnected from the laser device for any reason. The
laser's wavelength is specified in the range of 1280 nm to 1330 nm
with a maximum power output of 800 uw. Eye protection should be
specified to handle the stated wavelength. Never look directly into to
the laser port.
1.3 SERVICE
All warranty and non-warranty repairs must be returned freight
prepaid and insured to Patton Electronics. All returns must have a
Return Materials Authorization number on the outside of the shipping
container. This number may be obtained from Patton Electronics
Technical Service at:
tel: (301)975-1007
email: [email protected]
www: http://www.patton.com
Patton Electronics' technical staff is also available to answer any
questions that might arise concerning the installation or use of your
Model 1193RC. Technical Service hours: 8AM to 5PM EST, Monday
through Friday.
3
22..00 G
GEEN
NEER
RA
ALL IIN
NFFO
OR
RM
MA
ATTIIO
ON
N
Thank you for your purchase of this Patton Electronics product.
This product has been thoroughly inspected and tested and is warrant-
ed for One Year parts and labor. If any questions or problems arise
during installation or use of this product, please do not hesitate to con-
tact Patton Electronics Technical Support at (301) 975-1007.
2.1 FEATURES
· ITU G.703/G.704 (E1) transport over Single-mode fiber
· Full duplex operation over a single strand of fiber
· Single-mode fiber with max distance 50km (31 miles)
· Two fiber connection options available: FC or SC
· 120 Ohm (RJ-48C) and 75 Ohm (dual coax) G.703/G.704 termina-
tions
· Clocking options: Internal, Network (G.703/G.704), or Receive
Recover (fiber link)
· Optional AMI or HDB3 G.703/G.704 data coding
· Six front panel LED status indicators: Fiber line, E1 line, LOS, TM,
ER, and NS
· Testing/troubleshooting tools: V.54 compliant local/remote loop-
backs, V.52 compliant 511/511E test patterns
2.2 DESCRIPTION
The Patton Electronics
Model 1193RC extends E1
(G.703/G.704) service over Single-mode fiber. A pair of 1193RC
Single-Mode Fiber Modems provides G.703/G.704 network "extension"
between remote locations (See Figure 1 below).
The Model 1193RC is designed to transmit/receive G.703/G.704
data over one strand of fiber. The Model 1193RC allows transmission
over Single-mode fiber with distances up to 50km (31 miles). The
clocking options for the Model 1193RC include Internal, Network (from
G.703/G.704 Network), or Receive Recovered clock (from fiber line).
The Model 1193RC also incorporates V.54 compliant local/remote
loopbacks and V.52 compliant 511/511E test patterns. Front panel
switches activate test patterns and loopbacks. LED status indicators
monitor the fiber and G.703/G.704 links. The Model 1193RC is sup-
plied with a 1001RCM703FC (with an FC connector) or a
1001RCM703SC (with an SC fiber connector) rear card.
4
Figure 1. Network extension between remote locations
NOTE:
Packages received without an RMA number will not be
accepted.
G.703/G.704
G.703/G.704
Fiber Optic Line
Modem
Modem
