3
4
1.2 CE NOTICE
The CE symbol on your Patton Electronics equipment indicates
that it is in compliance with the Electromagnetic Compatibility (EMC)
directive and the Low Voltage Directive (LVD) of the Union European
(EU). A Certificate of Compliance is available by contacting Technical
Support.
1.3 SERVICE
All warranty and non-warranty repairs must be returned freight pre-
paid and insured to Patton Electronics. All returns must have a Return
Materials Authorization number on the outside of the shipping contain-
er. This number may be obtained from Patton Electronics Technical
Support:
Tel:
(301) 975-1007
Email: [email protected].
www: http://www.patton.com
Patton Electronics' technical staff is also available to answer any
questions that might arise concerning the installation or use of your
Model 1004ABRC. Technical Service hours: 8AM to 5PM EST,
Monday through Friday.
2.0 GENERAL INFORMATION
Thank you for your purchase of this Patton Electronics product.
This product has been thoroughly inspected and tested and is warrant-
ed for One Year parts and labor. If any questions during installation or
use of the 1004ABRC, contact Patton Electronics Technical Support at
(301) 975-1007.
2.1 FEATURES
• Convenient rack card features two short range modems
• Data rates to 115.2 Kbps
• Multi-point Operation on Data Transitions -- No need for
Hardware Control Signals
• Supports up to 50 multipoint drops in a polling environment
• Passes transmit & receive data
• Variable high/low impedance settings
• Operates with or without local “echo”
• Features 6 easy-to-read LEDs
• Silicon Avalanche Diode surge protection
• Fits conveniently in Patton’s rack chassis
2.2 DESCRIPTION
The Model 1004ABRC high speed, multipoint short range modem
rack card is a
dual rack card incorporating two short range modems.
Both units support asynchronous data rates to 115.2 Kbps over 1 or 2
twisted pairs and support distances to 4000 feet (19 AWG @19.2
kbps). In addition, Model 1004ABRC’s unique data control feature
allows it to be used in multi-point environments without the use of hard-
ware control signals.
The Model 1004ABRC can handle up to 50 terminal drops in a
multipoint polling environment. Using transitions on the data line to
handle line contention, the Model 1004ABRC can be used in environ-
ments that need multi-port bus contention, but do not have control sig-
nals such as RTS or DTR. The Model 1004ABRC may be configured
for high or low impedance operation, and the unit can operate with or
without “echo”.
Filling one function card slot on Patton’s Model 1000R16 rack
chassis, the Model 1004ABRC is available with RJ-11 or RJ-45 rear
interface cards. For workgroup and desktop communications, the
Model 1004ABRC also fits in Patton’s 2, 4 and 8 slot ClusterBoxes™.
The combination of rack mount, ClusterBox™ and self-powered units
provides a completely integrated “networking” solution.
NOTE:
Packages received without an RMA number will not be
accepted.
