3
4
1.3 SERVICE
All warranty and non-warranty repairs must be returned freight pre-
paid and insured to Patton Electronics. All returns must have a Return
Materials Authorization number on the outside of the shipping contain-
er. This number may be obtained from Patton Electronics Technical
Service at
Tel:
(301) 975-1007
email: [email protected]
www: http://www.patton.com
Patton Electronics’ technical staff is also available to answer any
questions that might arise concerning the installation or use of your
Model 1001RP Series. Technical Service hours: 8AM to 5PM EST,
Monday through Friday.
2.0 GENERAL INFORMATION
Thank you for your purchase of these Patton Electronics products.
They have been thoroughly inspected and tested and are warranted for
One Year parts and labor. If any questions or problems arise during
installation or use of these products, please do not hesitate to contact
Patton Electronics Technical Support at (301) 975-1007.
2.1 FEATURES
• Low-Profile mid-plane architecture design
• Provides redundant DC power for Patton rack cards
• Compatible with most Patton rack cards. The few that are not
compatible are: 1000CC, 1000RC/222NRC, 1010ARC, 1018ARC,
1045RC, 1060RC, 1070RC, 1080ARC, 1110RC/1110ARC, and
1140RC
• Plugs into Patton Electronics Redundant Rack Chassis (Model
1001RP)
• Redundant supply serves up to 14 function cards
• Single supply serves up to 16 function cards
• Easily replaceable front and rear modules
• LED Indicators: 12V, Fail, and Temperature
2.2 DESCRIPTION
There are two 1001 series power supplies: (1) Model
1001RPEM-RVDC is a rear power entry card that is used in conjunc-
tion with Model 1001RPSM-R48V front power supply card, and (2)
Model 1001RPEM-RAC is a rear power entry card that is used in con-
junction with Model 1001RPSM-RUI front power supply card. Using
two Model 1001RP supply modules, system operations won’t crunch to
a standstill if one supply fails. The second supply simply takes over!
CSU/DSUs, Baseband modems, and G.703 modems plugged into a
Model 1001RP continue to operate as normal.
Full redundancy is provided using two front power supply modules
and two rear power entry modules. That’s only two slots in a Patton
1001RP chassis. The remaining 14 slots can provide high speed
G.703 access, router links or short haul modem hook-ups. When
redundancy is not required, a single power supply may be used to
power a full rack of 16 function cards.
NOTE:
Packages received without an RMA number will not be
accepted.
