APPENDIX B
FACTORY REPLACEMENT PARTS
The Patton Model 1001R14P rack system features interchangeable
rear half cards, power cords/fuses for international various operating
environments and other user-replaceable parts. Model numbers and
descriptions for these parts are listed below:
Patton Model #
Description
1001RPEM-RAC .................120/240V Rear Power Entry Module
1001RPSM-RUI...................120/240V Front Power Supply Module
1001RPEM-RDC.................DC Rear Power Entry Module
1001RPSM-R48A................48V Front Power Supply Module
1000RPEM..........................120/240V Rear Power Entry Module
1000RPSM-2.......................120/240V Front Power Supply Module
1000RPEM-DC ...................DC Rear Power Entry Module
1000RPSM-48A ..................48V Front Power Supply Module
12M-561* ............................Serial DB-25 (male) to RJ-45 adapter
12F-561** ............................Serial DB-25 (female) to RJ-45 adapter
10-561S*** ........................RJ-45 to RJ-45 adapter cable, 6 ft.
0805US ..............................American Power Cord
0805EUR.............................European Power Cord CEE 7
0805UK ...............................United Kingdom Power Cord
0805AUS.............................Australia/New Zealand Power Cord
0805DEN.............................Denmark Power Cord
0805FR ...............................France/Belgium Power Cord
0805IN.................................India Power Cord
0805IS.................................Israel Power Cord
0805JAP..............................Japan Power Cord
0805SW ..............................Switzerland Power Cord
0516FPB1 ...........................Single Width Blank Front Panel
0516FPB4 ...........................4-Wide Blank Front Panel
0516RPB1...........................Single Width Blank Rear Panel
0516RPB4...........................4-Wide Blank Rear Panel
0821R4................................400 mA Fuse (5x20mm)
Littelfuse 239.400 or equivalent
0821R2................................200 mA Fuse (5x20mm)
Littelfuse 239.200 or equivalent
056S1..................................Set of 16 #4 pan head screws/washers
* Wired according to EIA-561 Standard
** Wired according to EIA-561 Standard
*** Wired straight through (use with adapters listed above)
13
APPENDIX C
MODULAR INTERFACE PIN-OUTS
MODULAR INTERFACE - 10 Wire RJ-45 (EIA-561)
Contact Number
Circuit
Description
1
N/A
Not Used
2
107
DSR
3
109
Received Line Signal Indicator (CD)
4
108 / 2
DTE Ready (DTR)
5
102
Signal Common
6
104
Received Data
7
103
Transmitted Data
8
106
Clear to Send
9
105 / 133
Request to Send / Ready for Receiving
10
N/A
Not Used
Pins 2-9 conform to the EIA/TIA-561 eight position non-synchronous interface standard.
14
