background image

NL

- 36 -

Gevaar! 

Bij het gebruik van toestellen dienen enkele 

veiligheidsmaatregelen te worden nageleefd om 

lichamelijk gevaar en schade te voorkomen. Lees 

daarom deze handleiding / veiligheidsinstructies 

zorgvuldig door. Bewaar deze goed zodat u de in-

formatie op elk moment kunt terugvinden. Mocht 

u dit toestel aan andere personen doorgeven, 

gelieve dan deze handleiding / veiligheidsins-

tructies mee te geven. Wij zijn niet aansprakelijk 

voor ongevallen of schade die te wijten zijn aan 

niet-naleving van deze handleiding en van de vei-

ligheidsinstructies.

1. Veiligheidsaanwijzingen

De overeenkomstige veiligheidsinstructies vindt u 

in de bijgaande brochure.

Gevaar! 

Lees alle veiligheidsinstructies en aanwijzin-

gen.

 Nalatigheden bij de inachtneming van de 

veiligheidsinstructies en aanwijzingen kunnen 

elektrische schok, brand en/of zware letsels tot 

gevolg hebben. 

Bewaar alle veiligheidsinstruc-

ties en aanwijzingen voor de toekomst.

 Dit gereedschap is niet bedoeld om door perso-

nen (inclusief kinderen) met een beperkt fysiek, 

sensorisch en geestelijk vermogen of door perso-

nen, die niet de nodige ervaring en/of kennis heb-

ben, te worden gebruikt, tenzij dit onder toezicht 

van een persoon gebeurt die verantwoordelijk is 

voor hun veiligheid of die hen aanwijst, hoe het 

gereedschap moet worden gebruikt. Op kinderen 

moet toezicht worden gehouden om te voorko-

men dat ze met het gereedschap spelen.

Als de netaansluitleiding van dit apparaat be-

schadigd wordt, dan moet hij door de fabrikant 

of diens klantendienst of door een gelijkwaardig 

gekwali

fi

 ceerde persoon vervangen worden, om 

gevaren te vermijden.

 Verklaring van de symbolen op het ge-

reedschap (

fi

 g. 16):

1.   Gevaar!  Gebruiksaanwijzing in acht nemen!

2.  Gevaar! Stekker onmiddellijk uit het stopcon-

tact trekken als de kabel beschadigd of door-

gesneden is.

3.  Gevaar! Gebruik het gereedschap niet in 

vochtige omgeving.

4.  Voorzichtig! Gevaar door wegspringende de-

len, veiligheidsafstand in acht nemen.

5.  Gevaar! Roterend gereedschap.

6.  Voorzichtig! Draag een veiligheidsbril!

7.  Voorzichtig! Gehoorbeschermer dragen

8. Gevaar! 

Voor 

onderhoudswerkzaamheden, 

reiniging en herstelling de netstekker uit het 

stopcontact verwijderen.

2. Beschrijving van het gereedschap 

en leveringsomvang  

2.1 Beschrijving van het gereedschap 

(

fi

 g. 1-3/12)

1.    Bovenste schuifbeugel

2.   Onderste schuifbeugel

3. Motoreenheid

4.   Freesmes

5.   Kabeltrekontlastingsklem

6.   Tweehandsveiligheidsschakelaar

6a Tweepuntsschakelaar

6b Schakelhendel

6c Netaansluitstekker

7.   Kabelbevestigingsclips

8.   2 schroeven voor montage bovenste schuif-

beugel

9.   2 schroeven voor montage onderste schuif-

beugel

10. 2 schroeven voor montage tweehandsveilig-

heidsschakelaar

11. 2 moeren M6

12. 2 vleugelmoeren

2.2 Leveringsomvang

Gelieve de volledigheid van het artikel te contro-

leren aan de hand van de beschreven omvang 

van de levering. Indien er onderdelen ontbreken, 

gelieve u dan binnen 5 werkdagen na aankoop 

van het artikel te wenden tot ons servicecenter of 

tot het verkooppunt waar u het apparaat heeft ge-

kocht, en leg een geldig bewijs van aankoop voor. 

Gelieve daarvoor de garantietabel in de service-

informatie aan het einde van de handleiding in 

acht te nemen.

• 

 Open de verpakking en neem het toestel 

voorzichtig uit de verpakking.

• 

 Verwijder het verpakkingsmateriaal alsmede 

verpakkings-/transportbeveiligingen (indien 

aanwezig).

• 

 Controleer of de leveringsomvang compleet 

is.

• 

 Controleer het toestel en de accessoires op 

transportschade.

• 

 Bewaar de verpakking indien mogelijk tot het 

verloop van de garantieperiode.

Anl_PE_EBH_7530_SPK7.indb   36

Anl_PE_EBH_7530_SPK7.indb   36

09.10.14   08:23

09.10.14   08:23

Summary of Contents for PE-EBH 7530

































































































Reviews: