GB
- 246 -
8.4 Replacing the blade
For safety reasons, we recommend having the blade replaced by an
authorized professional. Important! Wear work gloves! Only replace
the blade with a genuine Einhell replacement blade, as this will ensu-
re top performance and safety under all conditions.
Carry out the following steps to change the blade:
1. Undo the fastening screw (see Fig. 11a).
2. Remove the blade and replace with a new one.
3. When
fi
tting the blade, make sure it is installed in the right direc-
tion. The blade‘s air vanes must project into the motor compart-
ment (see Fig. 11b). The dome mounts must be aligned with the
punch holes in the blade.
4. Then retighten the fastening screw with the universal wrench. The
tightening torque should be approx. 25 Nm.
At the end of the season, perform a general inspection of the lawn
mower and remove any grass and dirt which may have accumulated.
At the start of each season, ensure that you check the condition of
the blade. If repairs are necessary, please contact our customer ser-
vice center. Use only genuine spare parts.
8.5 Ordering replacement parts:
Please quote the following data when ordering replacement parts:
•
Type of machine
•
Article number of the machine
•
Identification number of the machine
•
Replacement part number of the part required
Current prices and information are available on request at your Horn-
bach store.
Spare blade art. no.: 34.054.30
Anl_PE_EM_1536_SPK7.indb 246
Anl_PE_EM_1536_SPK7.indb 246
26.08.15 09:17
26.08.15 09:17
Summary of Contents for PE-EM 1536
Page 255: ... 255 Anl_PE_EM_1536_SPK7 indb 255 Anl_PE_EM_1536_SPK7 indb 255 26 08 15 09 17 26 08 15 09 17 ...
Page 256: ... 256 Anl_PE_EM_1536_SPK7 indb 256 Anl_PE_EM_1536_SPK7 indb 256 26 08 15 09 17 26 08 15 09 17 ...
Page 257: ... 257 Anl_PE_EM_1536_SPK7 indb 257 Anl_PE_EM_1536_SPK7 indb 257 26 08 15 09 17 26 08 15 09 17 ...
