EN
68
Product overview
1
Suction head
2
Suction nozzle
3
Release buttons for
suction nozzle
4
On / Off button
5
Charging Connector &
Status LED
6
Release button for
suction head
7
Dirt water cap
8
Dirt water tank
9
MAX marking
10
Motor housing
11
Wiping attachment
12
Spray bottle
13
Microfibre cloth
SPRAy BottLE
Click the wiping attachment
11
onto
the spray bottle
12
.
1
Fill the spray bottle with water and
detergent. Attach the microfibre
cloth
13
to the wiping attachment
11
.
2
using the appliance
1.
Apply some cleaning detergent to the sur-
face by use of the spray bottle
12
.
2.
Wipe the surface thoroughly by use of the
microfibre cloth
13
.
3.
Press the on / off button
4
to switch on
the window cleaner and clean the surface
from top to bottom. Apply some pressure,
if required.
4.
If the water level has reached the MAX
marking
9
, switch off the appliance. Drain
the dirt water tank
8
by pulling the dirt
water cap
7
. Close it to continue working.
Intended use
The appliance is intended for cleaning wet and
even surfaces, e.g. windows, mirrors and tiles.
The appliance is not intended for commercial
use.
Any other use or modification to the appli-
ance is considered as improper use and could
cause considerable dangers.
Internal Battery
Upon delivery the battery is charged approx.
70%. Please charge the appliance completely
before first use.
Never continue working until the battery is
completely discharged, as this will reduce the
operating life of the battery.
If the battery level is low, the appliance stops
automatically and the status LED
5
is blink-
ing for 60 seconds. Charge the battery then to
avoid over discharge.
A fully charged battery allows approx. 18 min-
utes of cleaning.
PE-28FR_Fensterreiniger_Content_V1.0_14-12-05.indd 68
29.04.15 15:59
