EN
87
fIt BIt
Open the chuck ring
2
until the bit fits
into the chuck.
1
Fit the bit into the chuck
1
and tighten
the chuck ring
2
securely. Set the de-
sired torque at the torque ring
7
.
Remove the bit by opening the chuck
ring
2
.
2
fIt DrILL
Open the chuck ring
2
until the drill fits
into the chuck and set the torque ring
7
to drill .
1
Fit the drill into the chuck
1
and tighten
the chuck ring
2
securely.
Remove the drill by opening the chuck
ring
2
.
2
rotAtIon DIrectIon
To drive in screws or drill, set the rota-
tion direction switch
8
to
.
1
To loosen screws, set the rotation di-
rection switch
8
to
.
2
caution!
If the drill driver is not in
use, centre the rotation direction
switch, in order to lock the drill driver.
caution!
Before changing bits, cen-
tre the rotation direction switch, in
order to lock the drill driver.
caution!
Before changing drills,
centre the rotation direction switch,
in order to lock the drill driver.
Once the battery
5
is fully charged, pull
it out of the battery base
12
.
2
AttAch BAttery
Slide the battery
5
into the drill driver.
1
To release the battery
5
, press the bat-
tery release buttons
9
and pull it out of
the drill driver.
2
caution!
Only use the provided bat-
tery with the drill driver.
chArge BAttery
Slide the battery
5
into the battery base
12
of the charging station
10
and check
its LED lights
11
:
1
red
Operating
red, green flashes
During charging
red flashes
Fully charged
