GB
- 243 -
mediately switch o
ff
the lawn mower and wait for the blade to come
to a complete stop. Then inspect the condition of the blade and the
blade mount. Replace any parts that are damaged.
Lay the power cable on the ground in loops in front of the power out-
let. Mow away from the power outlet and cable, making sure that the
power cable always trails in the mowed grass so that the lawn mower
does not travel over the cable.
As soon as grass clippings start to trail the lawn mower, it is time to
empty the grass basket. Important! Before taking o
ff
the grass bas-
ket, switch o
ff
the motor and wait until the blade has come to a stop.
To take o
ff
the grass basket, use one hand to lift up the chute
fl
ap
and the other to grab onto the basket handle. Remove the basket. For
safety reasons, the chute
fl
ap automatically falls down after removing
the grass basket and closes o
ff
the rear chute opening. If any grass
remains in the opening, it will be easier to restart the engine if you
pull the mower back approximately 1m.
Do not use your hands or feet to remove clippings in or on the mower
housing, but instead use suitable tools such as a brush or a hand
broom.
In order to ensure that the majority of grass clippings are picked up,
the inside of both the grass basket and especially the net must be
cleaned after each use.
Reattach the grass basket only when the motor is switched o
ff
and
the blade has stopped.
Lift up the chute
fl
ap with one hand and, holding the grass basket by
its handle with the other hand, hang in the basket from the top.
Anl_PE_EM_1536_SPK7.indb 243
Anl_PE_EM_1536_SPK7.indb 243
26.08.15 09:17
26.08.15 09:17
Summary of Contents for 5599906
Page 255: ...255 Anl_PE_EM_1536_SPK7 indb 255 Anl_PE_EM_1536_SPK7 indb 255 26 08 15 09 17 26 08 15 09 17...
Page 256: ...256 Anl_PE_EM_1536_SPK7 indb 256 Anl_PE_EM_1536_SPK7 indb 256 26 08 15 09 17 26 08 15 09 17...
Page 257: ...257 Anl_PE_EM_1536_SPK7 indb 257 Anl_PE_EM_1536_SPK7 indb 257 26 08 15 09 17 26 08 15 09 17...
