Pattfield Ergo Tools 3420652, Manual

Page: 119 / 128

EN 119
Caution! Make sure there are no
batteries in the battery slot.
1 Ensure that it is possible to open and
shut the safety flap 9 and that the lock-
ing levers 11 are fixed.
CABLE CLIP
Fasten the power cable 4 to the handle
with the cable clips 3 . Fix the Allen key
holder to the upper push bar 12 .
2
TILT ANGLE
Open and loosen the tilt angle adjust-
ment 8 . Set the angle of the push bar
equally on both sides to positions 1 or 2
when operating.
1
SCARIFYING DEPTH
Pull the height adjustment lever and
choose the scarifying depth:
0 = drive position - 3 mm
1 = 3 mm
2 = 6 mm
3 = 9 mm
Insert the safety plug directly before
starting and remove it when interrupt-
ing or terminating the work.
2
Attach the upper and lower push bars 12
and 2 with the locking levers 11 .
2
BATTERIES
Lift the cover of the battery slot 6 and
push in two batteries until they click
into place.
1 2
Caution! Never use the appliance
with open locking levers.
Caution! Make sure the bend in the
push bar brackets point inwards.
PUSH BAR
Dismount the tilt angle adjustment 8
and fix the push bar brackets on both
sides.
1
Caution! Make sure the batteries
are always charged to the same
level.
Slide in the new roller and fasten it with
the Allen screws.
2
REPLACING THE ROLLER
Loosen the Allen screws with the Allen
key and remove the old roller.
1
Warning! Always wear work gloves
when changing the roller.