D
E
105
GRINDING
Attach the grinding guard
1
to the tool
and align it, so that the operator is pro-
tected from sparking.
Caution!
Make sure the tool is
switched off and unplugged.
1
Close the guard release lever. Securely
tighten the grinding guard
1
with the
wrench.
2
3
DEPRESSED GRINDING WHEEL
Install the wheel with its raised centre
facing the machine. Install the outer
flange
4
with the
smaller side
facing
the grinding wheel.
ROTATE HANDLE
Press the rotate handle button to re-
lease the rear end of the handle.
1
Turn the handle 90° to the desired po-
sition, so that the two arrows point at
each other.
Caution!
Make sure the handle is
securly locked in place.
2
CUTTING
Attach the cutting guard
2
to the tool
and align it, so that the operator is pro-
tected from sparking.
Caution!
Make sure the tool is
switched off and unplugged.
1
Close the guard release lever. Securely
tighten the cutting guard
2
with the
wrench.
2
CUTTING WHEEL
Install the cutting wheel. Install the out-
er flange
4
with the
larger side
facing
the cutting wheel.
Tighten the outer flange with the
wrench, while pressing the spindle lock
button
10
.
3A
DEPRESSED CUTTING WHEEL
Install the wheel with its raised centre
pointing
towards
the machine. Install
the outer flange
4
with the
larger side
facing the cutting wheel. Tighten the
outer flange with the wrench, while
pressing the spindle lock button
10
.
3B
Tighten the outer flange with the
wrench, while pressing the spindle lock
button
10
.
