ST#4
Instruction Booklet
6
FUNCTION OF PARTS
：
Figure 4
Figure 4
Figure 5
Figure 5
Do not set the speed at maximum when operating the scooter. Adjust the
speed at maximum when inclining a slope, and adjust to minimum speed
when declining a slope.
Check battery's capacity before driving, and charging batteries when at low
power.
MAIN SWITCH (A)
1.By turning the key clockwise to ON to turn on the power
2.By turning the key anticlockwise to OFF to turn off the power.
3.By turning the key to to turn on the head light.
Speed Dial Knob (B)
The Rabbit means fast and Turtle is slow.
By turning this you control total speed transferred to thumb controls.
Horn Button (C)
Pressing down the button to sound buzzer.
Battery Gauge (D)
There is a meter shows batteries capacity status.
When battery gauge's light trends to
F
, it indicates sufficient power capacity.
When battery gauge's light trends to
E
, it indicates insufficient power capacity.
TOP CONTROL PANEL (Hi/Lo)
High & Low Speed Switch allows speed to be changed from the normal maximum 12.8 kmph
to half for pavement use.
Panel Control
Pressing down at left side as left turn signal.
Pressing down at right side as right turn signal.
Pressing down as warning light.
(A)
(C)
(B)
(D)
(D1)
Figure 6
Figure 6
(Hi/Lo)
