Important
Do not hold by the drive foot retainer (Fig. 1, component 8) (BE
CAREFUL OF THE SEAT LOCKING ARRANGEMENT)
9. Take particular care to avoid back injury when removing the
Bathmaster Sonaris2 from the bath. Follow safe moving and
handling procedures. Seek help if you are unsure about installing
or removing the bath lift safely yourself.
Important
All components of the bath lift must be safely put away and stored.
Care and cleaning
Seat unit and backrest
• After bathing, rinse the bath lift (without covers) with warm water.
If the bath lift is heavily soiled, wash it down with commercially
available cleansing detergents and brushes.
• Remove the seat and backrest covers.
• Dry the product with a cloth.
• Use a mild disinfectant if required.
• Never clean the drive or hand controller with a high pressure
washer.
• While cleaning the seat unit, be careful of the mobile lifting scissors.
• Do not use strong solutions of disinfectant.
• Ensure that the bath lift is completely dry before storing it.
• We recommend cleaning the Bathmaster Sonaris2 thoroughly when
changing location or patient.
Hand controller and battery charger
• Please read the hand controller instructions.
• Prior to cleaning, the charger must be removed from the power
supply plug.
• Never dip the charger into water, spray wash or wash with water.
• Clean the charger with a cloth.
• Clean the hand controller with a damp cloth and then dry off.
• Ensure the bath lift is completely dry before storing it.
Seat and backrest covers
• Once removed from the main unit, the seat and backrest covers can
be washed at 40°C (max) in the washing machine.
• Do not dry the covers in a tumble dryer.
Maintaining the unit
The rechargeable battery in the hand control is not interchangeable
and may only be opened by the manufacturer.
The Bathmaster Sonaris2 should be inspected before each use to
ensure it is free from damage and excess wear. The Bathmaster
Sonaris2 is built to give long, reliable use without need for servicing.
While being robust, the lift should be treated with care and in
particular should not be dropped. If damage or deterioration is
suspected, please contact Patterson Medical or the distributor for
repair by an approved agent.
For professionals issuing the Bathmaster Sonaris2, Patterson
Medical recommends that the bath lift receives biannual inspections
in line with requirements of the Lifting Operations and Lifting
Equipment Regulations 1998 (LOLER). Inspections should only be
carried out by trained and experienced personnel.
We recommend giving the product a thorough inspection when
changing location or patient.
Recycling
Bath lift, hand controllers and recharger must be disposed of
correctly; if in doubt, contact your local refuse site.
The bath seat is made from plastic; Hand controller contains
electronic components and Lithium Ion batteries; Actuator and
recharger contain electronic components; please separate and
dispose of correctly.
Technical specifications (See Fig. 2)
Total weight without hand control:
24.5 lbs (11.1kg)
Weight of seat unit:
16 lbs (7.4kg)
Weight of backrest:
8 lbs (3.7kg)
Weight of hand controller:
0.88 lbs (0.4kg)
Seat depth (A):
20” (500mm)
Max seat depth (B):
18” (455mm)
Min seat height:
2.6” (65mm)
Total depth (backrest upright) (C):
27” (690mm)
Total depth (backrest lowered) (C):
35” (900mm)
Total height (D):
43.5” (1105mm)
Height of backrest (E):
26.8” (680mm)
Width of backrest (F):
14” (350mm)
Width of seat with side flaps (G)
28” (710mm)
Width of seat without side flaps:
14.7” (375mm)
Footprint of the base plate:
21” x 9” (530 x 220mm)
Backrest reclines to:
40°
Load capacity:
375 lbs (170kg)
Actuator degree of protection against
water ingress:
IP66
Hand controller degree of protection
against water ingress:
IP67
Power on time:
10%/2 min - 90%/18 min
Supply voltage:
11.1V | 14.8V
Operating voltage:
5A
Rechargeable Battery:
Li-ion
Charge time when low voltage
indicated:
1 hr
Decibel Level:
From / To
49db(A)/47db(A)
Input:
230V AC/50Hz; 120V
AC/60Hz
Output:
20V DC/120mA/10VA;
20V DC/500mA/10VA
6
