PATTA AAG07-100, Operation Instructions Manual

Page: 10 / 32

- 9 -
Installing or Removing the Wheel Guard
CAUTION:

Always be sure that the tool is switched
OFF and unplugged before installing or
removing the wheel guard.
 Never actuate the shaft lock when the
spindle is moving. The tool may be
damaged.
Mount the wheel guard with the protrusion
on the wheel guard band aligned with the
notch on the bearing box. Then rotate the
wheel guard around 180 degrees. Be sure
to tighten the screw securely. (
Fig. 3 )
To remove the wheel guard, follow the installation procedure in reverse.
Installing the Auxiliary Handle
CAUTION:
 Always be sure that the tool is switched
off and unplugged before carrying out any
work on the tool.
 Always be sure that the auxiliary handle is
installed securely before operation.
Screw the auxiliary handle securely on
either side of the tool head (gear housing).
(
Fig. 4 )