PAG
.7
DI
14
-
R
EV
.0
-
COD
.:
00-99-940010
Programmable functions description…
1.
Deactivation of ON – OFF acoustic signals
Arming or disarming the alarm system depressing the “
button A
” is signalled via a blinkers flash as well as an
acoustic warning. It may sometimes be necessary the exclusion of the acoustic warning and having a silent signalling.
Arming/disarming depressing the “
button A
” in this case will be signalled via blinkers only.
2.
Hazard signalling
Activating this function, it is possible to signal the standstill of the vehicle by the indicator lights. With the function
activated, turn the ignition key in position ON and make the indicator lights flashing once. The central unit will make
the indicator lights flashing for an indefinite time. It is possible to interrupt the signalling by turning on an indicator
light or by pressing the “
button B
” of the remote control. The exclusion of this function is signalled by a beep.
3.
Acoustic signalling of inserted indicator light
Using the vehicle, it can happen to forget an indicator light inserted. In this case, after 32 flashes of the indicator
light (right or left indifferently), the alarm will signal this forgetfulness to the driver with a brief acoustic signal. If the
indicator light remains activated (e.g. you are at a crossroads and the waiting time is quite long), the alarm will
repeat the acoustic signal after 12 flashes of the indicator light and so on.
Deleted of the programmed functions …
It is possible to reset all the programmed functions and to bring the alarm in the basic configuration, in the case you
are not sure about the programmed functions and you want to cancel all them (as reported in the programming
table).
With the system disconnected (LED off), compose the “secret release code” by the ignition key (see
paragraph “Use of the Secret Release code”).
At the end, the indication lights will quickly flash to confirm that the release code is correct.
Compose by the ignition key the figure 9 (turn on and off the ignition key for 9 times consecutively).
To confirm the cancellation, the alarm will emit a series of BEEPS.