PAG
.5
DI
12
-
REV
.
0
–
HPS
930
ING
Setting functions description
…
1.
Managing Modality
This function permits the passage from WAY 1 to WAY 2 and back.
If WAY 1 is programmed, when you turn OFF the ignition the alarm is activated. If you want that the alarm will not be
activated
, it’s necessary,
to turn off the ignition key once again and to turn ON and OFF the key.
If WAY 2 is programmed, when you turn OFF the ignition key the alarm is not activated. If you want that the alarm will
be activated
, it’s necessary
, once the ignition key is turned OFF, to turn ON and OFF the key again.
2.
Acoustic signals of arming and disarming
Arming and disarming the alarm, the system signals the events with the blinkers flash and an acoustic signal.
Arming and disarming the alarm, the system signals the events with only the blinkers flash.
3.
Acoustic signalling of inserted indicator light
Using the vehicle, it can happen to forget an indicator light inserted. In this case, after 32 flashes of the indicator light
(right or left indifferently), the alarm will signal this forgetfulness to the driver with a brief acoustic signal for every
blinker flash.
4.
Hazard signalling
By activating this function, it is possible to signal the standstill of the vehicle by the indicator lights. With the function
activated, turn the ignition key in position ON and make the indicator lights flashing once. The central unit will make
the indicator lights flashing for an indefinite time. It is possible to interrupt the signalling by turning ON an indicator
light. The exclusion of this function is signalled by a beep.
5.
Additional output
The system has an additional alarm output, it’s activ
ated only in case of alarm.
It’s possible to convert the output to modules command, it’s turn
ed ON when the system is inserted and turned OFF
when the system is disarmed.
