Usage of the PIN code is necessary, when the remote control lost, or the battery was flat, or the alarm
went wrong, but the device is switched ON status.
Dependent on equipment of the cars, it can be necessary to change the PIN code emergency switch
OFF operation, for example in that case, if the vehicle is equipped with
“START & GO”
system, by
this time we suggest to program the alarm for the 2. or 3. emergency switch OFF operating mode
instead of the default setting of the PIN code emergency switch OFF function!
Only importer of PATROLLINE and his contracted partners can do the programming of the alarm,
because special software and hardware is necessary to it!
1. PIN code emergency switch OFF with ignition key (it is the default setting of the alarm)
The code is a 3-figures number (from firm is:
1-2-3
) and must be composed with the ignition key of
the vehicle by following this procedure:
With armed alarm, open the driver side door with mechanical key. The alarm starts trigger, by this
time turn ON the ignition key, then turn OFF the ignition key as many time as the first digit of the PIN
code. During turn ON the ignition key the LED switches ON, after the first digit you have to wait to
switch OFF the LED.
After that immediately turn ON and OFF the ignition key as many time as per the second digit.
After the LED switch OFF, turn ON and OFF the ignition key as many time as per the third digit.
If the procedure was successful, the alarm switches OFF. If the procedure was unsuccessful, the alarm
stays in inhibition status, and triggers, by this time you have to restart the PIN code emergency switch
OFF procedure from first digit giving of the PIN code.
2. PIN code emergency switch OFF with usage of brake pedal/hand brake (this function can
be used after programming of the alarm)
With armed alarm, open the driver side door with mechanical key. The alarm starts trigger, by this
time turn ON the ignition key, then push/draw the brake pedal/hand brake as many time as the first
digit of the PIN code (the brake pedal/hand brake operate with CAN-BUS signals not in every car
types, therefore they can’t be used for PIN code emergency switch OFF not in every cars!) During
push/draw of the brake pedal/hand brake the LED switches ON, after the first digit, you have to wait
to switch OFF the LED.
December 2010.
Open only by the
USER!!!