Inhibition time, status of alert
After you switched ON the alarm with the default (OEM) remote control, the alarm will stay for 20
seconds into “neutral time” condition, signalled by the fixed light of the LED. The flashing of the LED of
the dashboard will indicate that the system supervises the vehicle and is ready to signal the alarms.
Alarm
Alarm
In case of attempt to brake in, the system will emit an optic-acoustic signal (flashing of the blinkers and
sound of the horn or of the siren, if installed, for 30 seconds, repeated.
To stop the alarm without disarming, press the CLOSING button of the remote control
To stop the alarm and disarming, press the OPENING button of the remote control.
Panic facility
Panic facility
After the inhibition time, if you press the CLOSING button of the remote control, the alarm will trigger
till 30 seconds (beep/acoustic signal).
Warning! You have to activate the panic function to
operate it.
Ask the help of the installer to the activation!
Alarm status
Alarm status
If armed alarm is disconnected from its connector, after the reconnection it stays in armed status,
protected the car further.
Anti hi-jack function
Anti hi-jack function
The alarm can immobilize the engine while the engine is ON when somebody hijack the car. This
function is switch OFF defaulty. The switching ON of this function happens based on the request of the
client in writing.
To switch ON this function, please contact with the installer.
Antiagression function
Antiagression function
The alarm can immobilize the engine while the engine is ON when somebody hijack the car together
with its own keys. This function is switch OFF defaulty. The switching ON of this function happens
based on the request of the client in writing.
To switch ON this function, please contact with the installer!
Exclusion of Siren
Through the ignition key it is possible to exclude the function of the horn or the siren.
With disarmed alarm (CDL opened), turn ON and OFF the ignition key for 3 times and, within 30
second, press the original remote control to close the CDL of the vehicle.
By this time, the central unit will signal the attempt to break in by the flashing of the blinkers only.
December 2010.