29
Immediately switch off the power tool if the tool insert is blocked due to overloading or tilting of the
component part. Be prepared for high reaction torque that can cause kickback.
The loss of control can
result in injuries.
Secure the workpiece.
A workpiece clamped with clamping devices or in a vice is held more secure than
by hand.
When working with the machine, always hold it firmly with both hands and provide for a secure
stance.
The power tool is guided more secure with both hands.
2) Safety instructions when using long drills
Never use the machine at speeds higher than the maximum rated drill speed.
At higher speeds, the drill
is likely to bend if it is allowed to rotate freely in contact with the workpiece, which can result in personal
injury.
At the beginning of drilling, the speed must always be low, and the tip of the drill must touch the
workpiece.
At higher speeds, the drill is likely to bend if it is allowed to rotate freely without being in
contact with the workpiece, which can result in personal injury.
It is only necessary to push in a straight line with the drill and must not be subjected to excessive
pressure
. The drills can bend and crack or cause loss of control, which can result in personal injury.
Summary of Contents for PV1150
Page 2: ...2...