Patriot PT-SM36, Installation & Operation Manual

Page: 3 / 15

3
INSTALLATION, OPERATION AND CARE OF
SALAMANDER
GENERAL
Patriot Equipment
are produced with quality workmanship and materials. Proper installation, usage,
and maintenance of your
Salamander
will result in many years of satisfactory performance.
It is suggested that you thoroughly read this entire manual and carefully follow al l of the
instructions provided.
Product parameter:
Model PT-SM36 BTU
Orifice size Regulator pressure
Nat. LP Nat. LP
36” Salamander 33,500 #31 #52 5”WC 10”WC
THIS APPLIANCE IS EQUIPPED FOR NATURAL GAS.
For Natural gas when equipped with No. #31 drill size orifice.
For LP gas when equipped with No.#52 drill size orifice.
For conversion to LP gas orifice see instruction plate on the appliance, see Page 11.
INSTALLATION
Before installing, verify that the type of gas supply (natural or propane) agrees with the specifications
on the rating plate located underneath the
Salamander
rack drip tray. If the supply and
equipment requirements do not agree, do not proceed with the installation. Contact your dealer
immediately.
UNPACKING
Immediately after unpacking, check for possible shipping damage. If the
Salamander
is found to be damaged,
save the packaging material and contact the carrier within 5 days of delivery.
Before installing, verify that the type of gas (natural or propane) and the clearance dimensions (see below)
agree with the specifications on the rating plate which is located under the crumb tray on the right side.
LOCATION
The equipment area must be kept free and clear of combustible substances.
Minimum Clearance Combustible Construction Non-Combustible Construction
Rear 2” 0”
Sides 2” 0”
Bottom 0” 0”