EN
Translation
of
the
original
instructions
15
APPLIANCE DESCRIPTION
See Fig. 1
1. Main
handle
2. Front
handle
3.
Main ON/OFF switch
4.
Front ON/OFF switch
5. Safety
guard
6. Cutting
blades
7.
Rear handle lock button
8.
Cable with a plug
9.
Cable strain relief
TECHNICAL DATA
Model
HT 600
Voltage
230-240 V~ 50 Hz
Power input
600 W
No-load speed
1700 ot/min
Cutting thickness
20 mm
Cutting length
550 mm
Weight 3,4
kg
Sound pressure level
86 dB(A) K = 3 dB(A)
Guaranteed sound power level
98 dB(A)
Vibration level
ah = 2,09 m/s2 K = 1,5 m/s2
Vibrations
The declared vibration emission values stated in the technical data and the declaration of conformity have been
measured in accordance with a standard test method provided by EN 60745 and may be used for comparing
one tool with another. The declared vibration can also be used in a preliminary assessment of exposure.
Warning!
Vibration value during actual use of the power tool can differ from the declared value depending on
the way the tool is used. The vibration level may increase above the level stated.
When assessing vibration exposure to determine safety measures under Regulation 2002/44/EC to protect
persons regularly using power tools in employment, exposure to vibration should consider, the actual conditions
of use and the way the tool is used, including taking into account all parts of the operating cycle such as the
times when the tool is switched off and when it is running idle in addition to the start time.
Note:
Illustrations and specifications in this manual are not binding and may differ from the delivered product.
The manufacturer reserves the right to make changes without prior notice.
INTENDED USE
The hedge trimmers are intended exclusively for cutting and alignment hedges, shrubs and ornamental shrubs,
for domestic use only. Any other use is explicitly prohibited.
The tool is intended for private home gardens, it is not suitable for use in public areas, parks and sports grounds,
along roads, on farms or in forestry.
