Minden Machine Shop Inc.
1302 K Road Minden, NE
800-264-6587 / 308-832-0220
Front Mount Tank Mounting - Bolster Type
The front mount tanks come in numerous configurations, so the
installation instructions will cover a broade range of tractor makes
and models. Generally, the installation procedure will be similar
for all tractor makes and models.
1.
Remove the front tractor weights from the mounting bolster.
Store the weights in a safe area where they cannot fall over
and cause an injury.
2.
Locate the bolster mount for the front mount tank.
3.
Mount the bolster mount onto the front bolster of the tractor.
4.
Use the side hook plates to to fasten in place. Connecting the
pieces with the 3/4" x 2-1/2" bolts, lock washers, and nuts.
Tighten the fasteners.
5.
Locate the 8; 3/4" x 2-1/2" bolts, lock washers, and nuts.
Mount the front saddle assembly to the bolster mount.
Tighten the fasteners.
6.
Insert the tank into the saddle, center it, and make sure the
lower sump is centered in the saddle cutout.
7.
Use the straps, j-bolts, lock washers, and nuts to keep the
straps in place and mount in the correct areas of the tank and
the tank saddle. The flat side of the "J" bolt will face the tank.
Tighten the straps when set. The tank straps may need to be
retightened after the first tank fill.
8.
Torque all fasteneres to the correct specification.
9.
After the first 20 hours of use, re-torque all the bolts.
Re-torque the bolts every 100 hours of use after that.
Tank
Tank strap with j-bolts
Tank Saddle
Bolster Mount
Mounting Hook
3/4 x 2-1/2" Hex bolt, lock washer
and nut
Completely Assembled Bolster
Type Front Mount Tank
Helicopter Tanks
17
