
Machine Inspection
After delivery of your new Wire Winder and/or completion of assembly, and before each use, inspection of the Wire
Winder is mandatory. This inspection should include, but not be limited to:
1. Check to see that all guards are in place, secured and functional.
2. That all fasteners are tight.
3. That all belts and chains are free from defects and correctly tensioned.
4. All springs are in working order and secured
5. Inspect the engine for oil level and fuel level.
Serial Number
To ensure efficient and prompt service, please furnish us with the model and serial number of the machine in all
correspondence or other contact. The serial number is located on a visible location of the machine.
Safety Decals
1. Keep safety decals clear and legible at all times.
2. Replace decals and signs that are missing or have become unreadable.
3. Safety signs are available from your Dealer or the Manufacturer.
How to install Safety Decals
1. Be sure that the installation area is clean and dry.
2. Decide on the exact position before you remove the backing paper.
3. Align the decal over the specified area and carefully press the small portion with the exposed sticky backing in
place.
4. Slowly peal back the remaining paper and carefully smooth the remaining portion of the decal in place.
5. Small air pockets can be pierced with a pin and smoothed out using a piece of decal backing paper.
Wire Winder 6500 V2024.1
8