7
9. Raise the canopy, ensure the two mounting bracket
screws are aligned with the J-shaped slots in the canopy.
Then turn the canopy in a clockwise direction until the
mounting bracket screws are completely engaged in
the J-shaped slots. Install the two previously removed
mounting bracket screws in the round holes. Securely
tighten all mounting bracket screws.
10. Attach the blade to the blade arm using blade screw,
blade washer and screw cap from the hardware kit.
Repeat for each blade.
11. Install the blade arm to the underside of the motor
assembly with previously removed motor screws. Tighten
each blade arm completely before moving to the next.
12. Install the E26-base LED bulb into the socket of the
light kit.
Important:
Make sure you allow the bulb and light kit to
cool before you replace the bulb.
ASSEMBLY INSTRUCTIONS
Blade Screw
Blade Washer
Blade Arm
Blade
Screw Cap
Motor
Assembly
Motor Screw
Bulb
Light Kit
Light Kit
11
10
12
9
Canopy
J-Shaped Slot
Round
Hole
Mounting Bracket Screw
